Ali, M., Bathaei, M. J., Istif, E., Karimi, S. N. H. & Beker, L. Biodegradable piezoelectric polymers: recent advancements in materials and applications. Adv. Healthc. Mater. 12, e2300318 (2023).
Yadegari, A. et al. Recent advancements in bio-based dielectric and piezoelectric polymers and their biomedical applications. J. Mater. Chem. B 12, 5272–5298 (2024).
Nagarajan, K. J. et al. A comprehensive review on cellulose nanocrystals and cellulose nanofibers: Pretreatment, preparation, and characterization. Polym. Compos. 42, 1588–1630 (2021).
Ji, J. et al. Research Trends of Piezoelectric Nanomaterials in Biomedical Engineering. Adv. Nanobiomed Res. 3, (2023).
Tseng, H. J., Tian, W. C. & Wu, W. J. Flexible PZT thin film tactile sensor for biomedical monitoring. Sens. (Switz.) 13, 5478–5492 (2013).
Muralt, P. et al. Piezoelectric Micromachined Ultrasonic Transducers Based on PZT Thin Films. 2276 ieee transactions on ultrasonics, ferroelectrics, and frequency control vol. 52 (2005).
Cheng, J., Chen, Y., Wu, J. W., Ji, X. R. & Wu, S. H. 3d printing of BaTiO3 piezoelectric ceramics for a focused ultrasonic array. Sensors (Switzerland) 19, (2019).
Li, J. et al. A walking type piezoelectric actuator based on the parasitic motion of obliquely assembled PZT stacks. Smart Mater. Struct. 30, (2021).
Yuan, H. et al. Low sintering temperature, large strain and reduced strain hysteresis of BiFeO3–BaTiO3 ceramics for piezoelectric multilayer actuator applications. Ceram. Int. 47, 31349–31356 (2021).
Habib, M., Lantgios, I. & Hornbostel, K. A review of ceramic, polymer and composite piezoelectric materials. J. Phys. D. Appl. Phys. 55, 423002 (2022).
Abbasipour, M., Khajavi, R. & Akbarzadeh, A. H. A comprehensive review on piezoelectric polymeric and ceramic nanogenerators. Adv. Eng. Mater. 24, 2101312 (2022).
Zhang, M. et al. Flexible self-powered friction piezoelectric sensor based on structured PVDF-based composite nanofiber membranes. ACS Appl. Mater. Interfaces 15, 30849–30858 (2023).
Organic biodegradable piezoelectric materials and their potential applications as bioelectronics. Soft Science (2023)
Wang, R., Sui, J. & Wang, X. Natural piezoelectric biomaterials: a biocompatible and sustainable building block for biomedical devices. ACS Nano 16, 17708–17728 (2022).
Zhu, H., Wang, J., Yang, X., Zhang, B. & Wang, Z. Tailoring Biopolymers for Electronic Skins: Materials Design and Applications. Advanced Materials 2413112, (2024).
Ansari, M. M., Heo, Y., Do, K., Ghosh, M. & Son, Y. O. Nanocellulose derived from agricultural biowaste by-products–Sustainable synthesis, biocompatibility, biomedical applications, and future perspectives: A review. Carbohydr. Polym. Technol. Appl. 8, 100529 (2024).
Yadav, M. et al. Seafood waste: a source for preparation of commercially employable chitin/chitosan materials. Bioresour. Bioprocess. 2019 6:1 6, 1–20 (2019).
Li, J., Ma, Y., Zhang, T., Shung, K. K. & Zhu, B. Recent advancements in ultrasound transducer: from material strategies to biomedical applications. BME Front 2022, 9764501 (2022).
Xu, M. et al. Piezoelectric biopolymers: advancements in energy harvesting and biomedical applications. Polym. (Basel) 16, 3314 (2024).
Agarwal, A., Shaida, B., Rastogi, M. & Singh, N. B. Food packaging materials with special reference to biopolymers-properties and applications. Chem. Afr. 2022 6:1 6, 117–144 (2022).
de Marzo, G. et al. Sustainable, flexible, and biocompatible enhanced piezoelectric chitosan thin film for compliant piezosensors for human health. Adv. Electron. Mater. 9, (2023).
Fathollahzadeh, V. & Khodaei, M. Enhanced piezoelectric response of PVDF by incorporating of BaTiO3 nanoparticles and surface treatment. J. Mater. Sci.: Mater. Electron. 35, 1–16 (2024).
Bettotti, P. & Scarpa, M. Nanocellulose and Its Interface: On the Road to the Design of Emerging Materials. Adv. Mater. Interfaces 9, (2022).
Teodoro, K. B. R. et al. A review on the role and performance of cellulose nanomaterials in sensors. ACS Sens 6, 2473–2496 (2021).
Miao, C., Reid, L. & Hamad, W. Y. Moisture-tunable, ionic strength-controlled piezoelectric effect in cellulose nanocrystal films. Appl. Mater. Today 24, (2021).
Liu, S., Qamar, S. A., Qamar, M., Basharat, K. & Bilal, M. Engineered nanocellulose-based hydrogels for smart drug delivery applications. Int. J. Biol. Macromol. 181, 275–290 (2021).
Do, T. V. V., Tran, N. B. A. & Nguyen-Thai, N. U. Preparation of spherical nanocellulose from Gai bamboo and mechanical properties of chitosan/nanocellulose composite. Polym. Compos. 44, 2287–2295 (2023).
Lin, N. & Dufresne, A. Surface chemistry, morphological analysis and properties of cellulose nanocrystals with gradiented sulfation degrees. Nanoscale 6, 5384–5393 (2014).
Moon, R. J., Martini, A., Nairn, J., Simonsen, J. & Youngblood, J. Cellulose nanomaterials review: structure, properties and nanocomposites. Chem. Soc. Rev. 40, 3941–3994 (2011).
de Marzo, G. et al. On the measurement of piezoelectric d33 coefficient of soft thin films under weak mechanical loads: A rapid and affordable method. Mater. Des. 247, 113399 (2024).
Di Giorgio, L., Martín, L., Salgado, P. R. & Mauri, A. N. Synthesis and conservation of cellulose nanocrystals. Carbohydr. Polym. 238, 116187 (2020).
Shakouri, Z., Nazockdast, H. & Sadeghi Ghari, H. Effect of the geometry of cellulose nanocrystals on morphology and mechanical performance of dynamically vulcanized PLA/PU blend. Cellulose 27, 215–231 (2020).
Al-haql, M., Habbal, H., Al Oklah, B. & Qurabi, N. Extraction and characterization of spherical nanocellulose from sesame husks. Heliyon 11, e41269 (2025).
Ahmad, N. D., Kusmono & Wildan, M. W. Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications. Results Eng. 17, 100842 (2023).
Kusmono Wildan, M. W. & Lubis, F. I. Fabrication and Characterization of Chitosan/Cellulose Nanocrystal/Glycerol Bio-Composite Films. Polymers 2021, Vol. 13, Page 1096 13, 1096 (2021).
Wojno, S., Fazilati, M., Nypelö, T., Westman, G. & Kádár, R. Phase transitions of cellulose nanocrystal suspensions from nonlinear oscillatory shear. Cellulose 29, 3655–3673 (2022).
Gray, D. G. et al. Chiral nematic structure of cellulose nanocrystal suspensions and films; polarized light and atomic force microscopy. Mater 8, 7873–7888 (2015).
Chen, J. et al. All bio-based chiral nematic cellulose nanocrystals films under supramolecular tuning by chitosan/deacetylated chitin nanofibers for reversible multi-response and sensor application. Chem. Eng. J. 466, 143148 (2023).
Korolovych, V. F. et al. Cellulose nanocrystals with different morphologies and chiral properties. Polym. (Guildf.) 145, 334–347 (2018).
Miao, C. & Hamad, W. Y. Critical insights into the reinforcement potential of cellulose nanocrystals in polymer nanocomposites. Curr. Opin. Solid State Mater. Sci. 23, 100761 (2019).
Li, H. Z., Chen, S. C. & Wang, Y. Z. Preparation and characterization of nanocomposites of polyvinyl alcohol/cellulose nanowhiskers/chitosan. Compos. Sci. Technol. 115, 60–65 (2015).
Aranaz, I. et al. Chitosan: an overview of its properties and applications. Polym. 2021, Vol. 13, Page 3256 13, 3256 (2021).
Xu, L. et al. Fully biodegradable piezoelectric nanogenerator based on cellulose/PLLA electrospun fibers with high-performance for mechanical energy harvesting. Colloids Surf. A Physicochem. Eng. Asp. 706, (2025).
Xiao, X. et al. Tunable Construction of Chiral Nematic Cellulose Nanocrystals/ZnO Films for Ultra-Sensitive, Recyclable Sensing of Humidity and Ethanol. Int. J. Mol. Sci. 2024, Vol. 25, Page 4978 25, 4978 (2024).
Khan, A. et al. Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films. Carbohydr. Polym. 90, 1601–1608 (2012).
Luo, Y. et al. Chitosan particles modulate the properties of cellulose nanocrystals through interparticle interactions: Effect of concentration. Int. J. Biol. Macromol. 240, 124500 (2023).
Riva, G. H. et al. Cellulose – chitosan nanocomposites – evaluation of physical, mechanical and biological properties. Cellul. – Fundamental Asp. Curr. Trends (2015).
Zheng, X., Yang, H., Xia, W. & Zhang, Y. Size-dependent mechanical behaviors of cellulose nanocrystals induced by interfacial zone: implications for advanced electronic devices design. ACS Appl. Nano Mater. 8, 3974–3984 (2025).
Zheng, X., Li, Y., Xu, S., Yang, H. & Zhang, Y. Interfacial mechanical behavior of cellulose nanocrystals and chitosan. Macromolecules 58, 803–815 (2024).
Marin, L. & Bardosova, M. Functional Chitosan-Based Composites. Functional Chitosan-Based Composites 200 (2022).
Ghasemlou, M., Daver, F., Ivanova, E. P., Murdoch, B. J. & Adhikari, B. Use of synergistic interactions to fabricate transparent and mechanically robust nanohybrids based on starch, non-isocyanate polyurethanes, and cellulose nanocrystals. ACS Appl. Mater. Interfaces 12, 47865–47878 (2020).
Yadav, M., Behera, K., Chang, Y. H. & Chiu, F. C. Cellulose nanocrystal reinforced chitosan based UV barrier composite films for sustainable packaging. Polym. 2020, Vol. 12, Page 202 12, 202 (2020).
Reay, S. L., Jackson, E. L., Ferreira, A. M., Hilkens, C. M. U. & Novakovic, K. In vitro evaluation of the biodegradability of chitosan–genipin hydrogels. Mater. Adv. 3, 7946–7959 (2022).
Hashemi Doulabi, A., Mirzadeh, H., Imani, M. & Bagheri-Khoulenjani, S. Chitosan/polyethylene glycol fumarate blend films for wound dressing application: in vitro biocompatibility and biodegradability assays. Prog. Biomater. 7, 143–150 (2018).
Frick, J. M., Ambrosi, A., Pollo, L. D. & Tessaro, I. C. Influence of glutaraldehyde crosslinking and alkaline post-treatment on the properties of chitosan-based films. J. Polym. Environ. 26, 2748–2757 (2018).
Islam, N., Wang, H., Maqbool, F. & Ferro, V. In vitro enzymatic digestibility of glutaraldehyde-crosslinked chitosan nanoparticles in lysozyme solution and their applicability in pulmonary drug delivery. Molecules 24, 1271 (2019).
Altun, E., Çelik, E. & Ersan, H. Y. Tailoring the microbial community for improving the biodegradation of chitosan films in composting environment. J. Polym. Environ. 28, 1548–1559 (2020).
Lončarević, A., Ivanković, M. & Rogina, A. Lysozyme-induced degradation of chitosan: the characterisation of degraded chitosan scaffolds. J. Tissue Repair Regeneration 1, 12–22 (2017).
Guarino, V. et al. Degradation properties and metabolic activity of alginate and chitosan polyelectrolytes for drug delivery and tissue engineering applications. AIMS Mater. Sci. 2, 497–502 (2015).
Roman, D. L., Ostafe, V. & Isvoran, A. Deeper inside the specificity of lysozyme when degrading chitosan. A structural bioinformatics study. J. Mol. Graph. Model. 100, 107676 (2020).
Ramírez-Hernández, A. et al. Fingerprint analysis of FTIR spectra of polymers containing vinyl acetate. Dyna (Medellin) 86, 198–205 (2019).
Makrani, N., Ammari, A., Benrekaa, N., Rodrigue, D. & Giroux, Y. Dynamics of the α-relaxation during the crystallization of PLLA and the effect of thermal annealing under humid atmosphere. Polym. Degrad. Stab. 164, 90–101 (2019).
Ren, K., Shen, Y. & Wang, Z. L. Piezoelectric Properties of Electrospun Polymer Nanofibers and Related Energy Harvesting Applications. Macromol. Mater. Eng. 309, (2024).
Zhao, G. et al. Electrospun Poly(l‐Lactic Acid) Nanofibers for Nanogenerator and Diagnostic Sensor Applications. Macromol. Mater. Eng. 302, (2017).
Shojaeiarani, J., Bajwa, D. S., Stark, N. M. & Bajwa, S. G. Rheological properties of cellulose nanocrystals engineered polylactic acid nanocomposites. Compos. B Eng. 161, 483–489 (2019).
Lu, T. et al. Effects of modifications of bamboo cellulose fibers on the improved mechanical properties of cellulose reinforced poly(lactic acid) composites. Compos. B Eng. 62, 191–197 (2014).
Yamaguchi, H. et al. Highly flexible and conductive glycerol-doped PEDOT:PSS films prepared under an electric field. J. Electron. Mater. 47, 3370–3375 (2018).
Zhou, S. et al. Chitosan-Doped PVDF film with enhanced electroactive β phase for piezoelectric sensing. ACS Appl. Electron. Mater. 6, 2575–2583 (2024).
Sun, S. et al. Thermoplastic PHB-reinforced chitosan piezoelectric films for biodegradable pressure sensors. ACS Appl. Bio Mater. 7, 6823–6831 (2024).
Prokhorov, E. et al. Chitosan-BaTiO3 nanostructured piezopolymer for tissue engineering. Colloids Surf. B Biointerfaces 196, 111296 (2020).
Prokhorov, E., Luna-Bárcenas, G., Limón, J. M. Y., Sánchez, A. G. & Kovalenko, Y. Chitosan-ZnO nanocomposites assessed by dielectric, mechanical, and piezoelectric properties. Polym. 2020, Vol. 12, Page 1991 12, 1991 (2020).
link